FEP tubing size should be selected by matching the inside diameter to flow requirements, the outside diameter to the fitting, and the wall thickness to pressure, temperature, and handling conditions. Dimensions alone are not enough: tolerance, bend radius, fluid compatibility, operating cycles, and supply format can all affect performance in service. This guide explains how engineers […]

High-purity chemical handling places tighter demands on tubing than general industrial fluid transfer. Chemical compatibility is only the starting point. The tubing must also meet the system’s requirements for extractables, particles, dimensional consistency, permeation, pressure, temperature, fitting reliability, cleaning, and packaging. PFA tubing is frequently specified for aggressive chemicals and clean fluid paths because PFA

PTFE sheet thickness should be selected around the finished component and its operating conditions—not simply by choosing the thickest sheet available. A gasket must compress and retain sealing stress. A chemical lining must cover and protect its substrate without creating unnecessary fabrication difficulty. A machined PTFE plate needs enough material for facing and finishing while

The main difference between PVDF and PTFE is that PVDF is stronger, more rigid, and easier to weld, while PTFE offers broader chemical resistance, higher temperature capability, and much lower friction. PVDF is often selected for structural fluid-handling parts, pipes, tanks, and machined components. PTFE is frequently preferred for gaskets, seals, bearings, liners, and high-temperature

When comparing PTFE vs PP, the right material depends on operating temperature, chemical exposure, mechanical load, friction, purity requirements, and cost. PTFE (polytetrafluoroethylene) and PP (polypropylene) are both widely used thermoplastics, but they serve different engineering requirements. PTFE offers a much wider temperature range, exceptional chemical resistance, very low friction, and excellent electrical insulation. PP

PTFE, PFA and FEP belong to the fluoropolymer family and share many valuable properties, including excellent chemical resistance, low surface energy, strong electrical insulation and reliable performance in demanding industrial environments. However, they are not interchangeable in every application. The most important difference is processability. PTFE does not flow like a conventional melt-processable thermoplastic, so

PTFE sheets are available in several manufacturing forms and material grades, each suited to different sealing, lining, insulation, wear and machining applications. The most common PTFE sheet types include molded PTFE sheet, skived PTFE sheet, virgin PTFE sheet and filled PTFE sheet. These terms do not all describe the same characteristic. “Molded” and “skived” identify

PTFE vs PEEK: Which High-Performance Plastic Should You Choose? When comparing PTFE vs PEEK, engineers and buyers are looking at two of the most widely used high-performance polymers for demanding industrial applications. Both materials offer excellent temperature resistance and chemical stability, but their mechanical properties and ideal applications are very different. PTFE is particularly valued

Is PTFE toxic? This is a common question among engineers, purchasing professionals, equipment manufacturers, and users who work with PTFE materials. PTFE, or polytetrafluoroethylene, is a high-performance fluoropolymer widely used in chemical processing, semiconductor manufacturing, food processing equipment, electrical insulation, laboratories, sealing systems, and many other industrial applications. Under normal operating conditions, PTFE is generally

The short answer is yes—Teflon is commonly understood as a type of plastic. More precisely, Teflon™ is a brand name used for a family of fluoropolymer products, while PTFE, or polytetrafluoroethylene, is the specific high-performance plastic most people mean when they say “Teflon.” PTFE is not an ordinary commodity plastic. Its combination of chemical resistance,