Bushings and bearings
CNC turning and milling with material and manufacturing support from prototype through repeat production.
PEEK rod Manufacturer · Direct Factory Supply
PEEK rod
JIAFUXIN manufactures and supplies PEEK rod for industrial buyers that require high strength, fatigue resistance, wear performance and machinability. Standard sizes, custom dimensions and drawing-based factory processing are available.
Engineering overview
Stock Shapes Ready for Precision Machining
Select PEEK rod by diameter, straightness, concentricity, material grade, filler and finished-part tolerance. Final suitability depends on the complete operating environment and required service life.
Valve seats and plugs
Valve and pump parts with material and manufacturing support from prototype through repeat production.
Electrical insulators
Bearings and guides with material and manufacturing support from prototype through repeat production.
Turned OEM parts
OEM drawing parts with material and manufacturing support from prototype through repeat production.
Selection guide
Information Required for Material Selection
Share these details to shorten quotation time and reduce specification risk.
01
Operating temperature
Minimum, maximum and continuous temperature under load.
02
Chemical environment
Media, concentration, pressure and exposure duration.
03
Mechanical demand
Load, movement, wear, creep and dimensional stability.
04
Manufacturing details
Dimensions, tolerance, surface, quantity and documentation.
Technical overview
PEEK rod Specifications
| Material | Polyether Ether Ketone |
|---|---|
| Available grades | Unfilled, glass-filled, carbon-filled and bearing grades |
| Manufacturing process | Ram extrusion, paste extrusion, compression molding and sintering |
| Supply formats | Standard and custom diameters with machining allowance |
| Typical temperature capability | Typically up to +250°C continuous; grade dependent |
| Typical density | Approximately 1.30–1.51 g/cm³ by grade |
| Custom processing | Cut blanks, CNC turning, drilling, threading, grooving and inspection |
Values are general reference information, not a material certificate. Grade, process, dimensions and test method affect actual results.
Performance and design
Why Engineers Specify PEEK rod
Chemical compatibility and cost should be assessed for the application.
Material performance
High strength, fatigue resistance, wear performance and machinability.
Grade options
Unfilled, glass-filled, carbon-filled and bearing grades.
Selection criteria
Diameter, straightness, concentricity, material grade, filler and finished-part tolerance.
Secondary processing
Cut blanks, CNC turning, drilling, threading, grooving and inspection.
Frequently asked questions
PEEK rod FAQ
What should buyers verify when choosing a PEEK rod manufacturer?
Confirm the resin or compound, manufacturing route, dimensional tolerance, inspection method and batch traceability. The drawing and service conditions should be reviewed before price becomes the deciding factor.
What information should I send to a PEEK rod supplier?
Send the required grade, dimensions, tolerance, quantity, operating temperature, chemical media, mechanical load, documentation and delivery destination. Photos or drawings help prevent quotation assumptions.
Can the JIAFUXIN PEEK rod factory make custom sizes?
Custom dimensions and secondary processing can be reviewed from a drawing, sample or application specification. Feasibility depends on the material, production method, tolerance and order volume.
Are PEEK rod rod and bar the same product?
Rod and bar are often used interchangeably for round stock. The purchase specification should define diameter, length, straightness, ovality, grade and machining allowance.
What is the difference between PEEK and PTFE?
PEEK is much stronger and better suited to structural load and wear, while PTFE has lower friction and broader chemical inertness. Use the PEEK guide to compare grades and product forms.
Is PEEK a fluoroplastic?
No. PEEK is a high-performance engineering thermoplastic, not a fluoropolymer. It is included in the range because buyers often compare it with fluoroplastics for high-temperature and precision components.
How do I select the right PEEK rod for my application?
Select PEEK rod by diameter, straightness, concentricity, material grade, filler and finished-part tolerance. Final suitability depends on the complete operating environment and required service life.
How much machining allowance is needed on PEEK rod?
Allowance depends on rod diameter, straightness, ovality, finished tolerance and whether stress relief is required. Send the finished drawing so stock size can be selected correctly.
Which PEEK rod grade is best for wear or load?
Compare unfilled and reinforced grades against load, speed, counterface, lubrication, temperature and chemical media. A stronger grade is not automatically the best option for every bearing or seal.
Can I order samples before repeat production of PEEK rod?
Samples and prototypes can be reviewed before a production order. Approval criteria should identify critical dimensions, appearance, material grade and any required test records.
Talk to an engineer
Request a PEEK rod Quote
Send the material, dimensions, quantity, working conditions and drawings. JIAFUXIN will recommend a practical manufacturing route.